In Stock & Fully Certified
Aluminium Tubular
Pool Fencing
Oxworks’ range of Aluminium Pool Fencing has brought style, colour and safety to thousands of homes throughout Australia. Our Flat Top design is by far the most popular with its clean lines and simple design. Like all of our powder coated aluminium manufactured products, our Aluminium Pool Fencing range is covered by our famous 10 Year Manufacturing Warranty.
10 Colours in Stock
Powdercoated Colour Options
Surfmist® | SM
Satin
Shale Grey® | SG
Satin
Dune® | DU
Satin
Silver Pearl | SI
Pearl
Primrose | PR
Gloss
Jasper® | JA
Satin
Woodland Grey® | WG
Satin
Ironstone® | IR
Satin
Monument® | MO
Satin
Satin Black | BL
Satin
Highest Quality Aluminium
Our tough, rust free aluminium panels, gates and posts are made from 6063 T6 aluminium and designed specifically for pool surrounds. Rails are 38x25mm with 16mm pickets passing through the rails and welded in 6 points.
Exceeds Australian Safety Standards
All swimming pool fences are a safety product, and must be manufactured and installed to comply with Australian Pool Safety Standards AS1926.1 (2012). Our entire range of pool fencing has been manufactured to exceed AS1926.1 (2012) and independently tested by NATA approved testing laboratories to confirm compliance.
Product Resources
Australian Pool Fence Laws
In Australia, the benchmark for Pool Fence Regulations are Australian Standard AS 1926.1-2012 Safety Barriers for Swimming Pools, however Pool Fencing Standards, Codes and Regulations vary from state to state.
Before purchasing your new fencing product from Oxworks, we recommend you visit your local government regulation websites to ensure you are getting exactly what you require and what will comply with your relative local and State Government Building Standards.
- Australian Standard AS 1926.1-2012
- QLD – Pool fence regulation in Queensland
- ACT – Pool fence regulations in ACT
- NSW – Pool fence regulations in New South Wales
- NT – Pool fence regulation in Northern Territory
- SA – Pool fence regulations in South Australia
- TAS – Pool fence regulations in Tasmania
- VIC – Pool fence regulations in Victoria
- WA – Pool fence regulations in Western Australia
Frequently Asked Questions
Yes – Our Flat Top Range of Pool Fencing Panels, Gates & Accessories come stocked in all stores in 10 on trend colours.
No – to be Pool Compliant, your gate must open out, away from the pool area. This is to ensure if anyone is leaning on it, there is no pressure on the latch forcing it to open
Latch Posts are recommended to attach your gate Magna Latch to. The Magna Latch pull knob needs to sit 1500mm off the ground level to comply with Australian Pool Safety Standards AS1926.1 (2012).
Our standard shrouds allow approx. 7.5 degrees each way for sideways angle adjustment for each panel. For any adjustment greater than 7.5 degrees, we do supply a multi directional shroud (available in black or coat to order) which allows close to 180 degree angle.
Our standard Magna Latch + Hinge Pack requires 30mm allowance for your pool gate (approx. 15mm either side). Therefore, the distance between your posts should be 1000mm.
You should allow 5-10mm longer than the panel between posts. For Example; Distance between posts for our standard 2400mm long panels should be approximately 2455-2460mm. Distance between posts for our 3000mm long panels should be approximately 3055-3060mm.
It depends on each site, but most aluminium pool fencing installations should take 1 day, however larger jobs or jobs requiring custom panels measured on site will usually require additional time.
Yes. Our fencing exceeds AS1926.1 and has been independently tested in a NATA accredited facility.
All our manufactured aluminium fencing comes with a 10-year structural and powdercoating warranty. *Conditions apply.
We recommend digging holes approx. 550-600mm deep and 200mm in diameter when installing our 50 x 50 Pool fencing posts. This equals approx. 1 bag of our Concrete post mix per hole.
Yes, you can use a hack saw or a grinder with 1mm cutting blade to easily cut our aluminium panels. The cut end will be hidden in the fence brackets.
We recommend using either 50 or 75mm galvanised or Stainless-Steel coach screws. If fixing to a concrete slab, we recommend 50 or 75mm galvanised or Stainless-Steel dyna bolts.